学術雑誌

1. 宮増祐卓, 中村佑大, 赤津観, 増澤正宏; "高透磁率磁石を用いた永久磁石同期電動機の高性能化に関する検討", 電気学会論文誌Ｄ部門, Vol.133-D, No.9, pp.943-951, 2013年9月
2. 土方大樹, 茂田智秋, 刈谷暢孝, 赤津観, 加藤崇; "二巻線方式を用いた複合起磁力モータに関する検討", 電気学会論文誌Ｄ部門, Vol.133-D, No.10, pp.986-994, 2013年10月
3. Hiroki Hijikata and Kan Akatsu, "Principle and Basic Characteristic of MATRIX Motor with Variable Parameters Achieved through Arbitrary Winding Connections”, IEEJ Journal of Industry Applications, Vol.2, No.6, p.283-291, 2013.

査読つき国際学会

1. Makoto Usui, Noriya Nakao and Kan Akatsu, “Motor Control Methods with a Behavior Model Based on FEA Results”, IEEE PEDS 2013 (The IEEE 10th International Conference on Power Electronics and Drive Systems) , April May 22-25, 2013, Kitakyushu, Japan
2. Noriya Nakao and Kan Akatsu, “Current Optimization Strategy for Surface Permanent Magnet Synchronous Motor Drives Based on a Rigorous Mathematical Model”, IEMDC (International Electric Machines and Drives Conference) 2013, May 12-15, 2013, Chicago
3. Kan Akatsu and Nobuyuki Matsui “New Trend of Motor Technology for Automobiles-Introduction and Overview”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
4. Kan Akatsu, Naoki Watanabe, Masami Fujitsuna, Shinji Doki and Hiroshi Fujimoto, “Recent Related Technologies for EV/HEV Applications in Japan”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
5. Tomohiro Takahashi and Kan Akatsu, “Integrated DC-DC Chopper Using Energy Harvesting”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
6. Naoya Kawakami and Kan Akatsu, “High Power Transformer and Motor Drive System Design for an Electric Helicopter”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
7. Yutaro Sugawara and Kan Akatsu, “Characteristics of a Switched Reluctance Motor using Grain-Oriented Electric Steel Sheet”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
8. Noriya Nakao and Kan Akatsu, “A Simple Unipolar Excitation Strategy for Switched Reluctance Motors by Using PWM Current Control ”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
9. Saori Furukawa and Kan Akatsu, “A Principle of Next Generation Spintronics Motor”, ECCE ASIA(5th Annual International Energy Conversion Congress and Exhibition for the Asia/Pacific Region) 2013, June 3-6, 2013, Melbourne, Australia
10. Noriya Nakao and Kan Akatsu, “Torque Ripple Suppression of Permanent Magnet Synchronous Motors Considering Total Loss Reduction ”, ECCE (IEEE Energy Conversion Congress & Expo) 2013, September 15-19, 2013, Denver, Colorado, USA
11. Yutaro Sugawara and Kan Akatsu, “Characteristics of a Switched Reluctance Motor using a Grain-Oriented Electric Steel Sheet”, ICEMS (International Conference on Electrical Machines and Systems) 2013, October 26-29, 2013, Busan, Korea
12. Tomohiro Takahashi, Takanori Nagai, and Kan Akatsu, “High Efficiency SRM drive using a Current Source Inverter”, IFEEC (International Future Energy Electronics Conference) 2013, November 3-6, 2013, Tainan, Taiwan
13. Brent Gagas, Takashi Fukushige, Natee Limsuwan, Chen-Yen Yu, Kan Akatsu and Robert D. Lorenz “Suggested Design Space in a PMSM Parameter Plane for Variable Flux Machines”, IEMDC (International Electric Machines and Drives Conference) 2013, May 12-15, 2013, Chicago
14. Natee Limsuwan, Takashi Fukushige, Kan Akatsu, Robert D. Lorenz, ” Design Methodology for Variable-Flux, Flux-Intensifying Interior Permanent Magnet Machines for an Electric-Vehicle-Class Inverter Rating”, ECCE (IEEE Energy Conversion Congress & Expo) 2013, September 15-19, 2013, Denver, Colorado, USA
15. Takashi Fukushige, Natee Limsuwan, Takashi Kato, Kan Akatsu and Robert D. Lorenz, “Efficiency Contours and Loss Minimization over a Driving Cycle of a Variable-Flux Flux-Intensifying Interior Permanent Magnet Machine”, ECCE (IEEE Energy Conversion Congress & Expo) 2013, September 15-19, 2013, Denver, Colorado, USA

学会発表

1. 川上尚也,赤津観,"高周波大電力トランスを用いたSRM駆動システムの設計", 平成25年度 電気学会産業応用部門大会
2. 菅原雄大郎,赤津観,"方向性電磁鋼板を用いたSRモータの諸特性"，平成25年度 電気学会産業応用部門大会
3. 高橋知宏,赤津観,"エネルギーハーベスティングを用いた一体型DC-DCチョッパの検討"，平成25年度 電気学会産業応用部門大会
4. 古川彩織, 赤津観"スピントロニクスモータの設計に関する研究"，平成25年度 電気学会産業応用部門大会
5. 相曽浩平, 赤津観"電圧シングルパルス駆動時におけるSRM設計手法"，平成25年度 電気学会産業応用部門大会
6. 天野峻輔, 赤津観"FPGAを用いた高周波インバータによるPMモータ駆動"，平成25年度 電気学会産業応用部門大会
7. 坂上高大, 赤津観"回転子固定ボルトに発生する渦電流損失の検討"，平成25年度 電気学会産業応用部門大会
8. 田倉大地, 赤津観"DCモータの火花抑制およびブラシ進角制御の基礎検討"，平成25年度 電気学会産業応用部門大会
9. Noor Hidayah Binti Mustafa Kamal, 赤津観"グラフェンを蒸着した銅線の高周波電気抵抗特性"，平成25年度 電気学会産業応用部門大会
10. Kazuma Miyane, Kan Akatsu, "Large Current and Large Voltage Drive by Using Cluster H-bridge Inverters", Korea-Japan Technical Workshop on Semiconductor Power Converter(KJTWS 2013), October 2013, Nagoya, Japan
11. Hiroki Hijikata and Kan Akatsu; "Driving Method of MATRIX Motor by Using Cluster H-bridge Inverter", 2013 Japan-Korea Joint Technical Workshop on Semiconductor Power Converter, Octorber 2013, Nagoya, Japan
12. 貝森弘之、赤津観 "永久磁石同期モータの鎖交磁束を用いたビヘイビアモデルの提案", 電気学会 モータドライブ、回転機合同研究会, MD-13-28,RM-13-37, 2013年7月